H109SH X4 Pro High FPV, HD-Kamera, 3-axis, Touchscreen TX
H109SH     




10995 kr

                Köp antal




Beställningsvara. Leveranstid 2-5 dagar.

Produkten kan fn. ej köpas



Hubsan H109SH - X4 PRO REAL TIME FPV Drone

The X4 Pro High Edition Quadcopter with 1080P Camera and 3-Axis Gimbal from Hubsan can - fully laden with gimbal and camera - boasts an expected flight time of up to 27 minutes, depending on conditions. Additionally, with all cargo removed (including camera and gimbal) flights of up to 40 minutes become possible. This bundle is classed ready-to-fly (RTF), meaning all essential hardware is included and only basic assembly - such as attaching the props with the included prop wrench - is required. The bundle includes the H7000, 2.4 GHz smart transmitter (handheld controller) with 7", 1280 x 720p resolution touchscreen and 5.8 GHz video receiver. Not only does it provide dual sticks for flying like a conventions RC transmitter; the touchscreen provides access to the ground station software plus real-time FPV monitoring of a standard definition video feed supplied by a transmitter on the aircraft.

As with other multi-rotor systems, it features a GPS based flight control system. The enables very precise positioning, which is especially important when recording video, and provides enhanced flight stability compared to relying on gyro/IMU data alone. Thanks to the ground station system integrated into the transmitter, waypoint navigation is also possible. With this technology, you simply plot a point-to-point rout over a map using the device's touchscreen. If you change your mind, the waypoint course can be updated in-flight.

Along with the quadcopter, transmitter, gimbal system, and camera, this bundle includes a 7000 mAh 3S LiPo flight battery, a 5000mAh LiPo transmitter battery, battery chargers for the flight battery and transmitter battery, a sun shade for the FPV screen, a strap for the transmitter, a prop wrench, a set of prop guards, and antennas for the transmitter and video receiver.

Features:
High Efficient Brushless Motors
2.4GHz Multi-Function Transmitter with 5.8GHz FPV Video Transmition
1080P HD Camera
3-Axis Gimbal
Adjustable FOV Shooting
Precision GPS
Compass Sensor
Headless Mode
Automatic Take Off Function
Automatic Landing Function
Automatic Return To Home Function
Altitude Mode
20-25 Minutes Fligth Time!
Propeller Guards

H7000 Ground Station Transmitter:
2.4 & 5.8GHz
10 Channels with two-way data transmission
Built in Android OS
7" Touch Screen (1280x800)
Built in GPS
Maximum possible radio range: 1000m
Maximum possible image transmission: 500-1000m
Image transmission speed: 30fps/s
Waypoints Flying
Battery: 2S 7.4V 5000mAh LiPo (included)
Size: 30 x 17 x 4.5 cm

Included Battery:
3S 11.1V 7000 mAh 25C 77.7Wh LiPo with XT60 connector and XH balance connector
Size: 115 x 45 x 35 mm
Weight: 360 g

Included HD Camera:
1080P HS, F-1/2.8 2.8mm
Video Resolution: 1920x1080 - 30FPS - AVI
Photo Resolution: 4032x3024 - JPG
Effective Pixels: 4MP
Supply Voltage: 2.8-5V
Operating Temp: -10°C-70°C
Camera Lens Size: M7 or optional
Maximum supported Micro SD Memory Card: 64GB (not included)

3-Axis Gimbal:
Adjustable side rotation from the transmitter
Jaw Rotation: +/- 45°
Up/Down Rotation: 65° to -125°
Left/Right Rotation: +/- 145°


Specifications:
Quad copter Size: 300 x 300 x 210 mm
Motor Center-to-Center: W259 x L262 mm
Motor Center-to-Center (diagonal): 368 mm
Weight (including the battery, HD Camera and 3-Axis Gimbal): 1406 g - weight also with prop gards: 1520 g (note: its too heavy with booth the gimbal and prop guards!)
Maximum Flying Weight: 1460 g
Propeller: 9.4" / 240 mm
Battery: 3S 11.1V 7000 mAh 25C LiPo
Charger: 240VAC wall adapper + LiPo Balance Charger
Motor: 4x Brushless 2212 KV1000
ESC: Brushless 30A
Maximum Drone Speed: 36 km/h
Maximum Wind Speed: 10 m/s
Maximum Pitch Angle: 36°

Included:
H109SM X4 PRO DRONE
Multi-Function 2.4/5.8 GHz FPV Transmitter with 3.7" LCD
HD Camera
3-Axis Gimbal
4x A & 4x B Propellers
LiPo Battery
110-240VAC 5A LiPo charger adapter
4A Balance Charger
XT60 Charger Leads
Propeller Tool
Propeller Guards
USB - Micro USB adapter cord
Manual

Not included:
MicroSD memory card
(Parachute System)

 

Levereras som: Ready-To-Fly
Lämplig för: Erfaren
Vikt: 1406 g
Diagonal längd: 368 mm
Sändare: Med 7" Touchscreen
Upplösning kamera: 1080P HD-kamera
Kamera: Ja
Motortyp: Borstlös
Mått: 300x300 mm
Batteri: 3S 7000mAh Li-Po
Laddare: 1-3S AC
Inkluderar även: Nackrem, 2S Li-Po till Sändare, Propellerskydd, Extra Rotorblad
Behöver kompletteras med: Minneskort Micro SDHC



Typ Filnamn *
PDF Bilder.pdf Ladda ned









Tillverkare

© GW Modellhobby AB, Org.nr. 556766-7398. Telefon 0500-60 00 88