Mateksys FC F722-SE. Top of the line!

Kan användas både till Copter och till Flyg (INAV).

Tillverkarens info - kika här!   (Rekommenderas starkt!)


FC Specifications:

MCU: 216MHz STM32F722RET6
IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
5x Uarts (1,2,3,4,6) with build-in inversion
1x Softserial supported
8x Dshot/Proshot/oneshot outputs
1x I2C
4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
4x individual ESC power/signal pads
1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
Dual Camera image switchable via AUX (modes tab-user2)
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Additional ADC for INAV analog airspeed

PDB Specifications
Input: 6~36V (3~8S LiPo) w/TVS protection
PDB: 4x35A (Max.4x46A)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
Current Sensor 184A (Scale 179)
Battery Voltage Sensor: 1:10 (Scale 110)
FC Firmware
BetaFlight / INAV
Target: MATEKF722SE

Physical
Mounting: 30.5 x 30.5mm, 4mm with Grommets 3mm
Dimensions:  36 x 46 mm
Weight: 10g

Including
1x FC F722-SE
6x silicon grommets M4 to M3
1x FR4 PCB Plate 36*36*1mm
1x Rubycon ZLH 35V/470uF (Low ESR)

"Matek is one of the best flight controller designers working today. They pack an unbelievable number of features into a board, while still keeping the pad layout intuitive. Although they don't have printed manuals, their web site has comprehensive documentation for all of their products.

The F722-SE packs in all the features you could want from an F7 flight controller, and two new features that almost nobody else has: camera switching and vTX power switching. That's right: you can turn the power to the vTX on and off using an Aux switch on your transmitter. This is better than pit mode! It works with any vTX! And it completely powers down your vTX so you know for sure you can't interfere with anybody. Camera switching means you can install two cameras and switch between them using an Aux switch. This is great for planes with downward facing cameras, or a "cheaterkwad" build with both a front and rear-facing camera that allows the pilot to fly backwards.

Another great feature of the F722-SE is that it supports iNav firmware. If you intend to use GPS-assisted flight, iNav supports features that Betaflight doesn't, such as GPS loiter, true return-to-home, and waypoint functionality."