BLX185 BRUSHLESS 8TH 6S ESC

The BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.

Fitted with super-reliable XT-90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management. The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.

Recommended battery specification: 5000mAh - 35C minimum - Per battery pack

Fits:
Arrma Kraton 6S
Arrma Typhon 6S
Arrma Senton 6S

Specs:
POWER TYPE: BLX Brushless Extreme Performance
ESC TYPE: 50AMP Continuous current capacity
Battery usage: 4S LiPo (14.8) up to (6S LiPo (22.2V) Stick Pack maximum
Low Voltage Cut-Off (LVC): 3.2V per cell
Thermal Protection Temperature: 105°C
Over-Voltage Protection: Over 6S LiPo (22.2V)
ESC Length: 57.5 mm
ESC Height: 38.9 mm
ESC Width: 59.5 mm (Including hold-down tabs)
ESC Weight: 196 g
Receiver Wire Length: 200 mm
Battery Wire Length: 165 mm
Motor Wire Length (Including Connector): 130 mm
Switch Length: 29.3 mm
Switch Width: 12.8 mm
Switch Height: 18 mm
Motor Bullet Connector Size: 4 mm
Wire Specifications: 10AWG
ESC Battery Connector Type: XT-90