XRotor Flight Controller F4 G3 & Micro 60A 4in1 BLHeli-32 DShot1200 Combo Set.

FC F4 G3 Super hardware and running speed
Super hardware, fast running speed integrates with STM32F405 MCU which features powerful computing capacity & super operating speed and high sensitivity ICM20602 6-axis motion sensor. It can run PID cyclic frequency and gyro refresh frequency at 32KHz. Integrated OSD chip can set OSD parameters on FMU parameter software and remote controller. Convenient and simple. Integrated OSD extended slot can record and save more flight log which is convenient for user to adjust aircraft based on flight data.

Highly Integrated Micro 60A 4in1 ESC
With a similar size of a FC, the 4IN1 ESC includes 4 high performance 60A BLHeli_32 DShot1200 ESCs, a 5V BEC which can provide power for devices (i.e. FC), and a voltmeter which allows FC to monitor the amp & volt in real time. Two ways for connecting the ESC to a FC: 1) connecting via soft cables, 2) soldering via solder tabs are provided for selection. And the shock-absorbing design of mounting holes effectively reduces the external vibration’s impact on high-sensitivity components and provides great shock-absorbing protection to upper devices (i.e. FC). This ESC is designed for FPV racing.

XRotor Flight Controller F4 G3 Specs:
Compatible with (Multirotors): Quadcopter
Firmware: OMNIBUSF4SD
FC Programming: Supported
Programming via: Betaflight/Cleanflight-configurator or Others
Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc.
Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc.
OSD: Built-in
Voltage Monitoring: Supported
Current Monitoring: Supported
External Buzzer: Supported
LED Control: Supported
BEC: 12V @ 2A
USB Port: MicroUSB

Size & Weight:
Size: 36x36mm
Weight: 6g

Applications:
130-300mm FPVs

XRotor Micro 60A 4in1 BLHeli-32 DShot1200 Specifications:
Continuous/Peak Current: 60Ax4/ 80Ax4
Input Voltage: 3-6S LiPo
BEC output: 5V/0.6A

Wires & Connectors:
Input Wires: 12AWG/130mm
Output Wires: No wires but solder tabs
Input Connectors: XT60 (w/ Wires Soldered on)
Output Connectors: No
(Note: All the wire length above is the original length not the length you see from the outside.)

Programming etc:
Firmware: Hobbywing_XRotor_BLHeli-32 Firmware
ESC Programming: BLHeliSuite32
Stick Programming: Supported
DEO: Supported
Throttle Range Calibration: Supported
Oneshot125 Mode: Supported
Oneshot42 Mode: Supported
MultiShot Mode: Supported
DShot150/300/600/1200: Supported
Timing: Supported
Motor Rotation: Supported
Size & Weight:
Size: 52x42x6.6mm
Weight: 15g
Applications: 130-300mm FPVs