Traxxas 120074-1-BLUE – TXC-4M 1/18 Extreme Crawler RTR – Blue
1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®.
TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with blue body panels and decals.
TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started.
Features
- Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits
- One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution
- 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear
- Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection
- Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake
- Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle
- Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist
- Single-speed transmission with all-metal gears and ball bearings
- Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels
- Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks
- Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look
- 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver)
- Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers
- 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts
- TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels
- Rust-resistant coated hex hardware and sealed ball bearings
Included
- TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body
- 3S brushless power system (3350 Kv motor and waterproof ESC)
- TQ™ Compact 2.4 GHz 2-channel transmitter
- 11.1 V 250 mAh 3S LiPo battery with iD®
- USB quick charger with iD®
- Maintenance tools
Required (not included)
- 4 x AA alkaline batteries for the transmitter
- USB-A power source, 2 A and 5 V recommended as a minimum
Specifications
- Scale: 1/18
- Type: Trail / rock crawler, 4WD
- Skill level: 1
- Length: 234 mm
- Width / track: 149 mm
- Height: 107 mm
- Wheelbase: 168 mm
- Ground clearance (center): 43 mm
- Weight: 467 g
- Driveline: Shaft-driven 4WD, locked spools front and rear
- Transmission: Single speed, internal gear ratio 74.1:1
- Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm)
- Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g
- ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g
- Battery: 3S LiPo 11.1 V 250 mAh with iD®
- Battery compartment: 41 x 22 x 14 mm
- Radio system: TQ™ Compact 2.4 GHz, 2 channels
Hitta rätt reservdel?
1. Ladda ner ritningarna under fliken "Dokument".
2. Ta fram numret på delen som du vill ha.
3. Sök fram delen på vår sida med hjälp av numret.
Finns inte delen, hör av er till oss, så undersöker vi varför.